Tank equipment PROMGAZE'NERGO KDS, KDM, OP, SMDK, etc.

Breathing valves are valve devices designed to release formed vapors or air, as well as to prevent the formation of vacuum in the tank.

Models: KDS-1500, KDS-3000, KDS UO with heating, KDM-50, KDM-50M, KDM-200, NDKM, KPG, SMDK, SMDK-50, KDT, OTR.

Flappers and control mechanisms. The flapper is installed inside a vertical tank on the intake and transfer pipe and serves for filling and draining petroleum products and for additional protection against possible leakage of petroleum products from the vertical tank in case of a faulty pipeline. The control mechanisms of the cracker are designed to open the caps of the cracker tanks and fix them in the open position.

Models: HP, EH-700, MUV, MU-I, MU-II.

A branch pipe is a small piece of pipe attached (rolled, riveted, welded) to a pipeline, tank, etc. structures that serve to connect pipelines and fittings to them in order to drain gas, steam, or liquid through them. Depending on the type of connection used, the free end of the pipe is provided with a flange, thread or socket.

Models: PV, PPR, PM, PZ, PZL, PVR-P.

The hatch is intended for internal inspection, repair or cleaning.

Models: LZ, LS, LL (LL 500, LL 600, LL 800, LL 600/900).

The fire barrier is designed to temporarily prevent the flame from entering the tank with oil and petroleum products when igniting explosive mixtures of gases and vapors with air coming out of it.

Models: OP-100AAN, OP (AAN), OP (AA), PP, POZH–80.

The sampler is designed for sampling over the entire height of surface tanks with petroleum products with normal and elevated pressure.

Models: AKP, PSRP, PO-1, PO-2, PSPR, PSPRP, PSRt-1, PSRT-1.

The intake device is designed for pumping gas turbine fuel from the upper layers of the vertical tank to prevent the supply of contaminated fuel and its solidification at subzero temperatures.

Models: ROM (PUV), WH, BR, LR–1000, TP, PRU.

The filters are designed for pre-purification of petroleum products from mechanical impurities.

Models: FU, FP, FS-1, FS-2.

The fire fighting equipment is intended for use in stationary foam extinguishing installations of vertical tanks with oil and petroleum products.

Models: HSV, GPSS.

The gas strapping of tanks is designed for the recovery of vapors of light fractions of hydrocarbons of small and large respiration of tank farms at ambient temperatures from -45 to +50 ° C.

Models: PEG.

Other equipment: Rotary damper, siphon valve, bottom sediment washing device, measuring bucket, bottom valve with control mechanism, steam recirculation unit, float level gauge, bottom drain devices, drain device, universal transition bridge.

Models: ZP, KS, Typhoon-20/24, VZV, VZN, KMU, UDU–10, US, MPU-0.7.